CM® M648AG

CM® Anchor Shackle, 2 ton, 3/8 in, 0.438 in Pin Dia, Screw Pin, 1.437 in Inner Length, 0.937 in Inner Width, 0.656 in Opening, 1-1/8 in Eye Outer Size, Alloy Steel Body, Alloy Steel Pin, Galvanized

Screw pin anchor/chain shackles allow quick and easy removal of the screw pin and can be useful in applications where the shackle is frequently removed, but not so much in applications where the pin is subject to torque or twisting.

• Load Capacity 2 ton
• Size 3/8 in
• Pin Diameter 0.438 in
• Pin Type Screw
• Inner Length 1.437 in
• Inner Width 0.937 in
• Opening Size 0.656 in
• Eye Outer Size 1-1/8 in
• Body Material Alloy Steel
• Pin Material Alloy Steel
• Finish Galvanized

• Made of special bar quality (SBQ) steel having fine grain, reduced sulfur and phosphorus
• Shackles show major deformation before failure
• Working load limit and traceability codes shown as permanent markings on body
• All shackles have alloy quenched and tempered pins
• Anchor shackles can be side loaded or used for multiple connections
• Special products engineering available to fit your special lifting, tie down and pulling needs
• 5:1 design factor