Ingersoll Rand® BCT-10
Beam Clamp, 10 ton Capacity, 3.54 to 15.60 in Beam
- BIPN:
- ING-BCT-10
- Availability:
- Typically Ships 7 - 21 days
- Quantity Interval:
- 1 / EA - Each
This product is NON-RETURNABLE.
-
The BCT Series 1-10 metric ton capacity beam clamps provide a temporary or permanent mount to a wide range of tapered or flat beams. They are the ideal rigging device for lifting, pulling or suspending loads. These units have been designed and verified to achieve a minimum design factor of 5:1 for vertical lifting with powered or manual hoists or winches, meeting ASME B30.16 and ASME B30.7. Quick and simple installation is achieved without tools. Units accommodate hook-mounted hoist or load blocks with minimal loss of headroom. The clamp jaws are designed to reduce beam stress by applying the load inside of the flange edge.
Applications: Ideal rigging device for lifting, pulling or suspending loads.
Standards/Certifications: Asme B30.16 And Asme B30.7
-
- Series BCT Series
- Load Capacity 10 ton
- Headroom 6.693 to 9.252 in
- Housing Material Steel
- Locking Type Locknut
- Suitable For Use With Hook Mounted Hoists
- Beam Flange Widths 3.54 to 15.60 in
-
- Quick installation by hand
- Designed and verified to achieve a minimum design factor of 5:1 for vertical lifting with powered or manual hoists or winches, meeting ASME B30.16 and ASME B30.7.
- Metric rated for vertical lifting or in-line pulling at 2200 lbs (1000 kg) per ton.
- Each unit is serialized, supplied with a test certificate and manual.
- Ideal rigging devices for lifting, pulling or suspending loads.
- Units accommodate hook-mounted hoist or load blocks with minimal loss of headroom.
- Low-headroom design adjusts to fit a wide range of flat or tapered beams
- The clamp jaws are designed to reduce beam stress by applying the load inside of the flange edge.