3M™ 1357-1quart

Flammable High Performance High Strength Contact Adhesive, 1 qt Can, Liquid, Grey/Green

$66.11
BIPN:
MMM-21200-19892
UPC:
21200198922
Availability:
Typically Ships in 1 to 7 Days
Quantity Interval:
1 / EA - Each

3M™ Contact Adhesive, Flammable High Performance High Strength, Can, 1 qt, 6.6 to 7 lb/gal Net Weight, Polychloroprene Base, Composition: Magnesium Resinate, Petroleum Distillate, n-Hexane, Acetone, Polychloroprene, Methyl Ethyl Ketone, Toluene, Rosin, Zinc Oxide, Liquid, 308 sq-ft/gal Coverage, 10 min Drying, 30 min Setting Time, Up to 30 min Curing, Grey/Green, Strong Petroleum, 230 deg F, 0.815 Specific Gravity, -7 deg F Flash,

3M™ neoprene high performance contact adhesive 1357 is a versatile, solvent-based adhesive. It offers high immediate handling strength and good heat resistance and is commonly used for bonding most metals and plastics. It is also suitable for large surface panel or composite lamination. 3M™ neoprene high performance contact adhesive 1357 has played a significant role in 3M™ portfolio of contact adhesives for 50 plus years. Since its inception in 1954 it has become one of our most versatile solvent-based adhesives for heavy duty surface laminations. This adhesive bonds to plastics and metals, including sheet metal, stainless steel. It provides excellent heat and water resistance, performing in temperatures up to 300 deg F/148 deg C. 3M™ neoprene high performance contact adhesive 1357 dries quickly while allowing time for positioning and adjustments without slowing down work processes. Whether it is being brushed or rolled on, the application of your 3M™ adhesive is a straightforward process. Start by carefully applying your adhesive to your surface until you've formed a uniform coat. Using an overlapping pattern, the application of one coat should prove sufficient for most surfaces. Effective adhesive coverage is accomplished when 80% or more of the surface is covered. Some substrates, including porous materials, may require an additional coat. In order to apply additional adhesive, simply wait until the existing adhesive becomes dry to the touch and then proceed with the application of the additional coat.