RIDGID® 50767

RIDGID® Power Pipe Cutter Kit, Bare Tool/Kit: Kit, 2-1/2 to 8 in, 32 rpm, 1/2 hp, 115 VAC, 20 A, 22-1/2 in Overall Length, 11-7/8 in Overall Width, Reversing: No

The RIDGID® model 258 power pipe cutter cuts 2-1/2 in (65 mm) to 8 in (200 mm) schedule 10*/40 steel pipe, galvanized pipe, rigid conduit, etc. At the job site or in the shop. Powered by the RIDGID® no. 700 power drive, the 258 is a displacement cutter that provides square cuts. The operator controls the feeding rate by pumping the hydraulic foot pump throughout the operation. A square cut with minimal burr on either 21 ft (6 m) or nipple lengths of pipe is achieved quickly** without abrasive dust, sparks, or open flame. Also, the RIDGID® pipe Roller for beveling can be used to rotate the pipe while second operator uses a grinder to bevel the pipe.

• Bare Tool/Kit Kit
• Pipe Capacity 2-1/2 to 8 in
• Speed 32 rpm
• Horsepower 1/2 hp
• Voltage Rating 115 VAC
• Amperage Rating 20 A
• Overall Length 22-1/2 in
• Overall Width 11-7/8 in
• Reversing No

• Square cut 21 ft (6 m) or nipple lengths of pipe without effort
• Easily cuts by displacing instead of removing pipe material
• No abrasive dust, dangerous sparks, or open flame
• Quickly cuts steel pipe with minimal burr
• Great for cutting pipe for groove joining
• Heavy duty design is perfect for field or shop use
• Adaptable for beveling