Loctite® 209820

Loctite® Fixmaster® Pourable Repair Compound, 4-Part, Series: MR Flex 80™, Kit, 1 lb, Urethane Base, Composition: Part A: Di(2-Ethylhexyl)Phthalate, Diethylmethylbenzenediamine, Carbon Black; Part B: Polyurethane Prepolymer, Dicyclohexylmethane-4,4'-diisocyanate; Part C: Polyurethane Prepolymer, Dicyclohexylmethane-4,4'-diisocyanate; Part D: Di(2-Ethylhexyl)Phthalate, Diethylmethylbenzenediamine, Carbon Black, Liquid, 27 cu-in/1 lb Coverage, 20 min Application, 8 hr Curing, Part A: Black/Part B: Brown/Part C: Brown/Part D: Black, Aromatic, 180 deg F, 1.07 Part C/1.07 Part D Specific Gravity, Part A: 163 deg C/Part B: 162.77 deg C/Part C: 162.77 deg C/Part D: 163 deg C Flash, 100:13.3 by Volume/77:23 by Weight Mixing, Applicable Materials: Rubber, 1090 psi Tensile, 525 psi Shear Strength

Composition: Part A: Di(2-Ethylhexyl)Phthalate, Diethylmethylbenzenediamine, Carbon Black; Part B: Polyurethane Prepolymer, Dicyclohexylmethane-4,4'-diisocyanate; Part C: Polyurethane Prepolymer, Dicyclohexylmethane-4,4'-diisocyanate; Part D: Di(2-Ethylhexyl)Phthalate, Diethylmethylbenzenediamine, Carbon Black

• Type 4-Part
• Series MR Flex 80™
• Container Type Kit
• Container Size 1 lb
• Coverage 27 cu-in/1 lb
• Curing Time 8 hr
• Color Part A: Black/Part B: Brown/Part C: Brown/Part D: Black
• Temperature Rating 180 deg F
• Flash Point Part A: 163 deg C/Part B: 162.77 deg C/Part C: 162.77 deg C/Part D: 163 deg C
• Applicable Materials Rubber
• Application Time 20 min
• Base Type Urethane
• Form Liquid
• Mixing Ratio 100:13.3 by Volume/77:23 by Weight
• Odor/Scent Aromatic
• Shear Strength 525 psi
• Specific Gravity 1.07 Part C/1.07 Part D
• Tensile Strength 1090 psi

• Loctite® MR Flex 80 pourable repair compound is a castable, two-part urethane for making molds, fixtures, expansion joints and non-scratching holding fixtures
• Expansion joints or transverse joints prevent cracks in concrete slabs by allowing movement during expansion and contraction caused by changes in temperature
• Has flexibility of rubber with the strength of a urethane
• Abrasion and impact resistant
• Can be poured into molds
• A 87 shore hardness
• Part A: polyurethane Hardner, part B: polyurethane adhesive, part C: polyurethane adhesive, part D: polyurethane hardner