Powers® 7302SD4

Powers® Power-Stud+® SD4 Wedge Expansion Anchor, 1/4 in Dia, 2-1/4 in Overall Length, 1-1/4 in Thread Length, 304 Stainless Steel, 1-3/4 in Minimum Embedment Depth, 1/4 in Drill, 1/4-20, Threaded Stud Head, UNC, 1/4 in Maximum Work Thickness

The Power-Stud+ SD4 and Power-Stud+ SD6 anchors are fully threaded, torque-controlled, stainless steel wedge expansion anchors which are designed for consistent performance in cracked and uncracked concrete. Suitable base material is normal weight and sand light weight concrete. The anchor is manufactured with a stainless steel body and expansion clip.

• Diameter 1/4 in
• Overall Length 2-1/4 in
• Thread Length 1-1/4 in
• Material 304 Stainless Steel
• Minimum Embedment Depth 1-3/4 in
• Drill Size 1/4 in
• Thread Size 1/4-20
• Head Type Threaded Stud
• Thread Type UNC
• Maximum Work Thickness 1/4 in

• Knurled mandrel design provides consistent performance in cracked concrete and helps prevent galling during service life
• Nominal drill bit size is the same as the anchor diameter
• Anchor can be installed through standard clearance fixture holes
• Length ID code and identifying marking stamped on head of each anchor
• Anchor design allows for follow-up expansion after setting under tensile loading
• Corrosion resistant stainless steel anchors
• 7/32 in nut height
• 7/16 in wrench
• 6 ft-lbf installation torque
• 5/16 in fixture clearance hole