ARO® TP0423S51RK47AA2

ARO TPX Series 2-Post Ram Piston Pump Package for 55 gallon Containers. Pump Specs: AFO423 Series Chop Check Piston Pump, 4-1/2 in Air Motor, 23:1 Ratio, 6 in Stroke, 1.8 gpm Max Flow, 3690 psi Max Fluid Pressure, 1-11-1/2 NPTF Material Outlet, PTFE /UHMW-PE Staggered (upper) & Glass Filled PTFE (lower) Packing Seals, Multi Wave Spring, Hardened Stainless Steel Plunger w/ Hard Chrome Plating. Ram & Plunger Specs: 55 Gallon Ram w/ Air Controls, Aluminum Follower w/Double Lip, Polyurethane Seal.

From the Manufacturer

Chop-Check pumps are designed to move medium-to-high viscosity fluids in difficult applications.

The heavy-hitters of the line, ARO chop-check pumps are designed to move medium-to high- viscosity fluids ranging from 15,000 cPs to more than 1,000,000 cPs, and at delivery rates up to 12.2 gpm (46.3 L/min).

Applications advantages of Chop-Check:

Extrusion: Chop-Check pumps are workhorses - able to deliver viscous adhesives, sealants, caulking and heavy lubricants to the application point at the desired pressure and flow rate.

Transfer & Supply: Depending on the model, some Chop-Check pumps are capable of achieving flow rates up to 12.2 gpm, ensuring efficient transfer of heavy greases, inks and other viscous materials.

Materials advantages of Chop-Checks:

Chop-Check pumps have a primer piston to 'feed' material into the pump. They are often used in conjunction with a follower plate to force material down. This prevents loss of prime due to Channeling - a condition where the pump inlet becomes surrounded by air due to the cavity formed when a high viscosity material does not level off when removed (Slumpability).

Stringy materials: Chop-Checks have mechanical, flat checks to overcome materials that resist cut-off and adhere to themselves.

Tacky materials: Chop-Check pump options come in high ratios to generate the fluid pressure needed to move materials that will adhere to hoses and equipment while wet.

• Pump Type Chop Check
• Series AFX/TPX
• Flow Rate 1.8 gpm
• Material Inlet Size Flange Mount
• Material Outlet Size 1 -11-1/2 NPTF - 1
• Air Inlet Size 1/2-14 NPTF - 1
• Air Exhaust Size 1-1/4 - 11-1/2 NPTF - 1
• Maximum Air Pressure 150 psi
• Maximum Fluid Pressure 3690 psi
• Motor Size 4-1/2 in
• Ratio 23:1
• Stroke 6 in
• Container Size 55 gal
• Material Inlet/Outlet Thread Type Flange Inlet/NPTF Outlet
• Spring Type Multi-Wave
• Plunger Material Hardened Stainless Steel
• Follower Plate Material Aluminum
• Follower Seal Type Double Lip
• Follower Seal Material Polyurethane
• Ram Type 2-Post
• Upper Packing Seal Material PTFE /UHMW-PE Staggered
• Lower Packing Seal Material Glass Filled PTFE
• Pump Material Carbon Steel