Film Media Splice Abrasive Belt, 3 in W x 132 in L, 36+ Grit, Precision Shaped Ceramic Abrasive, Polyester Cloth Backing
Cubitron™ II Abrasive Belt, Film Media Splice, 132 in Belt Length, 3 in Belt Width, 36+ Grit, Precision Shaped Ceramic Abrasive, Polyester Cloth Backing, Closed Coat, Mahogany, Applicable Materials: Aluminum, Composites and Soft Metals, YF-Weight Backing Weight, Dry/Wet Wet/Dry Operation
3M™ Cubitron™ II cloth belt 981F is an abrasive sanding belt for grinding, weld removal, finishing and blending on softer metals. It is constructed on a tough, Y-weight backing with fast cutting 3M™ precision shaped grain. The water-resistant material and cutting aide allow for use with liquid coolants to prevent loading when used on aluminum, bronze and brass. 3M™ Cubitron™ II cloth belt 981F is designed to solve three common problems associated with grinding and finishing aluminum and other soft metals - abrasive loading, edge shelling and operator fatigue. To help reduce loading when working with aluminum, bronze and brass, a dry lubricant is integrated into the abrasive and allows the abrasive grain to be relatively free from metal coating them, allowing the cutting surface of the mineral to remain effective. The waterproof backing also enables the user to rinse areas of the workpiece and the cloth during use, in case the abrasive begins to clog. To help prevent edge shelling, 3M™ Cubitron™ II cloth belt 981F features a durable, Y-weight polyester cloth backing that stands up to the stresses of working on gates, parting lines and flashing in tight spaces. Plus, unlike other cloth grinding belts, this one features a proprietary resin system to improve mineral adhesion, further reducing the chances of shelling. Worker fatigue can be a concern when grinding softer substrates. 3M™ Cubitron™ II cloth belt 981F grinds efficiently and 3M™ precision shaped grain can allow the operator to cut with less pressure, which may help to reduce physical exertion on an operator. About 3M™ precision shaped grain is the advanced technology behind 3M™ Cubitron™ II™ products. Its sharp, triangular structures continually fracture into sharp points and edges that slice cleanly through the substrate, rather than gouging or plowing as traditional abrasives do. This creates a fast cut and minimizes heat build up in the workpiece, reducing heat related defects. Moreover, because the abrasive itself stays cooler and sharper, it lasts significantly longer than conventional abrasive belts, decreasing the number of belt changeovers to lower operational costs. Its closed coat construction features a dense spread of abrasive grains across the surface of the cloth, cutting fast and providing a consistent finish. Applications and machine types gate grinding flashing removal parting line removal deburring finishing back stand grinders stroke sanding small bench grinders in-line sanders file belts.
