Cleanfit Blue Monster® 70885

Thread Seal Tape, Non-Toxic, 1429 in Length, 1/2 in Width, 0.0035 in Thickness, PTFE Material Type, Blue, -400 to 500 deg F Maximum Operating Temperature

Blue Monster PTFE thread seal tape is a thicker, denser, general-purpose thread seal tape that comes in a monstrous 1429 in roll. That's 5 times more tape than conventional rolls of low density thin tapes. Fewer wraps are necessary to affect a leak proof seal and it applies easily. No waste and no re-taping make sealing joints a breeze. Now available in a smaller roll, Mini-Monster PTFE thread sealant tape. Blue Monster thread sealing tape is manufactured from PTFE resin, a polymer consisting of recurring tetrafluoroethylene monomers whose formula is (CF2-CF2)n. It is inert and compatible with a very wide range of materials. Use Blue Monster on threads made from galvanized steel, iron, brass, copper, aluminum, stainless steel, polyethylene, polypropylene, PVC, CPVC, ABS, fiberglass and more.

• Type Non-Toxic
• Length 1429 in
• Width 1/2 in
• Thickness 0.0035 in
• Color Blue
• Material Type PTFE
• Maximum Operating Temperature -400 to 500 deg F

• Compatible with a broad range of gases and liquids
• Compatible with a broad range of piping materials will not harden or crack on the joints
• Effective across a broad range of temperatures and pressures
• Acts as a thread lubricant and anti-seize
• Prevents electrolytic corrosion of threads
• No curing time
• Unlimited shelf life
• Non-flammable
• 99.6% PTFE <0.4 percent composition
• >100% elongation
• 15 N/sq-mm tensile strength
• Pressure rating Mill-Rose blue monster thread sealing tape has been used to seal fittings carrying water and oil at pressures up to 10000 psi or 69000 kPa
• -450 to 500 deg F PTFE is completely stable up to 500 deg F
• Decomposition is slow up to 750 deg F
• Although decomposition will occur on contact with naked flames
• Pressure ratings are relative to the quality and torque of the fittings and the amount of tape used